line inclusion meaning in English
链状夹杂物
线状夹杂物
线状夹渣
Examples
- Effective modulus of composite materials with doubly periodic rigid line inclusions of unequal length subject to antiplane shear
含双周期不等长刚性线材料有效反平面剪切模量研究 - As a result , analysis and discussion show that the influence of interfacial crack or rigid line inclusion on the interaction between screw dislocation and inhomogeneity is significant
分析结果表明，界面裂纹和刚性线夹杂对螺型位错与夹杂的干涉作用具有强烈的扰动效应。 - When the radian of rigid line reaches extensive magnitude , the presence of interfacial rigid line inclusion can change not only attraction force on dislocation arisen by soft inhomogeneity into repulsion force , but also the interaction effects between screw dislocation and soft matrix . soft inhomogeneity can repel screw dislocation in piezoelectric material due to their intrinsic electromechanical coupling behavior
当界面裂纹达到一定弧度时，可以将硬夹杂对位错的排斥作用改变为吸引；当刚性线夹杂达到一定弧度时，不但可以将软夹杂对位错的吸引改变为排斥，也可以改变软基体对位错的作用性质。 - The interaction effects between circular interfacial cracks or rigid line inclusions and a screw dislocation located either outside or inside inhomogeneity under antiplane shear , the electroelastic interaction between a piezoelectric screw dislocation located either outside or inside inhomogeneity and circular interfacial cracks and rigid lines under longitudinal mechanical and inplane electrical loads in linear piezoelectric materials and the elastic interaction between an edge dislocation located either outside or inside inhomogeneity and interfacial crack along a circular inhomogeneity are dealt with in this paper
本文首次对位错与圆形弹性夹杂界面典型缺陷的力、电干涉进行研究，解决了无穷远反平面剪切作用下螺型位错与含界面裂纹或界面刚性线圆形夹杂的弹性干涉问题；无穷远纵向剪切和面内电场共同作用下压电螺型位错与含界面裂纹或界面刚性线圆形压电夹杂的力电耦合效应问题：刃型位错与含界面裂纹圆形弹性夹杂的干涉问题。 - The model of the problem is composed of two half spaces with half circular lining inclusion . horizontal surfaces of the half spaces are loaded with undetermined anti - plane force in order to satisfy continuity conditions at linking section , or with some certain forces to appear cracks . a series of fredholm integral equations of the first kind for determining the unknown forces can be set up through continuity conditions that expressed by using of the green " function
然后将问题的模型视为“契合”问题，即将其剖分为两个含半圆环形衬砌的弹性半空间，分别在其剖分面上加置未知的出平面荷载，并在欲出现裂纹位置加置出平面反力使之产生裂纹，接下去利用green函数表示出界面连续条件，建立决定待解外力系的第一类fredholm积分方程组。